피치 감지기
마이크를 이용한 실시간 음높이 감지. 음표, 주파수 및 튜닝 오차를 표시합니다.
마이크 사용 권한이 필요합니다
피치 감지기를 보컬 피치 모니터로 사용하기
실시간 음정 피드백은 노래 연습 시 음정 문제를 해결하는 가장 빠른 방법입니다. “듣기 시작”을 누른 다음, 목표 음에 맞춰 모음을 길게 유지하세요. 화면에는 가장 가까운 음명(예: A4), 정확한 주파수(Hz), 그리고 −50¢에서 +50¢ 사이의 센트(¢) 편차가 표시됩니다. 음수 편차는 음이 낮다는 뜻(목표 음보다 낮음)이고, 양수 편차는 음이 높다는 뜻입니다. 다음 음으로 넘어가기 전에 몇 초 동안 표시기를 0¢에 유지하도록 노력하세요. 이렇게 하면 귀와 성대 근육의 기억력을 동시에 훈련할 수 있습니다.
Sustained vowels work best — open sounds like "ah" and "oo" produce a stable fundamental that the detector can lock onto. Consonants and quick transients confuse the algorithm. For scale practice, sing up a major scale one note at a time and check that each step lands within ±10¢ of the target. For interval training, sing a root note, then a third, fifth, or octave above it, and verify each pitch independently against the display. To find your comfortable singing range, glide slowly from your lowest sustainable note to your highest and note where the readings stop being clean — that is your usable range. Pair this with the Chord Detector when you want to sing harmonies over a recorded backing track, or use the 메트로놈 to keep your warmup tempo steady while you focus on pitch.
피치 감지기를 실시간 악기 튜너로 사용하기
이 검출기는 모든 단음성 어쿠스틱 악기에 사용할 수 있는 크로마틱 튜너 역할을 합니다. 한 번에 한 음씩 연주하고 1~2초간 음을 유지한 뒤, 센트(¢) 단위의 편차를 확인하세요. 0¢는 음이 완벽하게 조율되었음을 의미하며, ±5¢는 대부분의 청취자에게는 들리지 않는 수준입니다. ±20¢를 넘으면 앙상블 연주 시 음이 뚜렷이 어긋나게 들립니다. 표시 범위는 ±50¢로, 양방향 모두 반음(semitone) 전체에 해당하는 보정 범위를 커버합니다.
For guitar tuning, work through the six standard strings — E2, A2, D3, G3, B3, E4 (low to high). Pluck each string firmly and let it ring; adjust the tuning peg until the cents reading settles near zero. For violin, viola, and cello, the open strings are tuned in perfect fifths — bow each string sustained and tune to concert pitch. Brass players can warm up on a long tone and check pitch drift as the instrument heats up; woodwinds should tune at performance temperature, not cold. Most ensembles use A=440 Hz as the concert reference, though some orchestras prefer A=442. Tip: turn off vibrato, chorus, reverb, or any effect pedals before tuning — modulation effects smear the fundamental frequency and make accurate readings impossible. If you also need to find the musical key of a recorded track, use the 키 파인더, or check the harmonic content of a sound with the Spectrum Analyzer.
음높이 감지 방법
- 1 마이크 사용 허용
- 2 음표를 연주하거나 부르기
- 3 감지된 음정, 음명 및 센트 편차를 확인하세요